PRE ORDER - BOO

PRE ORDER ONLY! END ON JANUARY 12 !!

EXCITING NEWS: NEW DESIGN ARE NOW AVAILABLE FOR UMLINTED ORDERS! THIS IS YOUR OPPORTUNITY TO STAY TRENDNING AND ELEVATE YOUR SMALL BUSINESS.

printing requires a heat press as part of the transfer process. NOT A  CIRCUIT. 

HeaPress the Design onto the Garment

• What to Put Down: Once the adhesive has been cured, the printed film is placed face down onto the fabric (such as a T-shirt or other garment). The heat press is then used to transfer the design from the film to the fabric by applying heat and pressure.

• Pressure and Temperature: The heat press should be set at a specific temperature (usually around 160-170°C or 320-340°F) for a set duration (typically around 10-15 seconds), depending on the fabric type and material of the transfer film.

5. Peel the Transfer Film:  After the heat press has done its job, you peel off the transfer film, leaving the design on the garment.

Specific Care Instructions: Make sure you know how to properly care for their DTF-printed garments to avoid wear and tear. For instance:

• Wash inside-out in cold water
• Do not bleach